Back

Will I need an electrician to go electric?

Will I Need Electrician HERO 2400x1350 1

When we upgraded to a heat pump (love my heat pump!), our installer told us that we would also need to upgrade to a 200 amp electrical panel. So we did. But it turns out that we had other, lower cost options.

It is worth taking the time to sort out what electrical infrastructure your home already has and what your options are to support the electric equipment you want now and in future.

Does your electrical panel have room for your new appliance?

The first thing to check is your electrical panel. It should be a grey, beige or white box typically located in a garage, basement or utility room. Take note of the number written on the main breaker switch, that is your panel size (typically 60, 100, 125 or 200 amps). If your panel uses fuses instead of breaker switches, it is time for an upgrade.

An electrician can assess your existing loads and determine whether your panel and electrical service can safely accommodate the new equipment.

Finally, your utility can tell you whether there is spare capacity in the wires going to your home and how the cost of upgrading that is calculated.

If your panel reads 100 amps or more, you may not need an upgrade. It may require some extra planning and some workarounds though and not every contractor out there knows of these options so research is key. For example, a range or stove will use less panel space than a separate stovetop. An energy management system can allow an EV charger to share electrical panel capacity with other electric appliances. Skinny breakers or subpanels might be an option to discuss with your electrician if lack of breaker switch space is the limiting factor.

If you think you might need an electrical panel upgrade, be sure to research and discuss options with your licensed electrician, it could save a lot of money.

You can learn more about how to avoid an electrical panel upgrade in Power Efficient Design in Home Electrification and Home Electrification: Service Upgrade Not Required.

Will I need new wiring?

You may need new wiring when replacing a fuel-burning appliance with an electric one. Heat pumps and electric water heaters are typically hardwired on a dedicated circuit while electric dryers and ranges often have special outlets with dedicated circuits — always check that your new appliance’s electrical plug matches your existing outlet.

Ask your installer whether the quote includes any required electrical work. Depending on the work involved, a licensed electrician may need to complete or inspect the installation.

If an electrician is already working in your home, consider asking them to prepare for other electric appliances you may want in the future, such as a heat pump, induction range, heat-pump water heater, electric dryer or EV charger. Planning ahead can save money and reduce the need for repeat visits.

Going electric doesn't have to mean a major electrical upgrade — with the right advice and a little planning, you may be closer than you think.

To discover